Anycubic 3D Printer Print Head Signal Cable
genuine image
Anycubic 3D Printer Print Head Signal Cable
Factory original wire harness is specifically designed to connect directly to the print head assembly ensuring accurate link stability between components.
Anycubic 3D Printer Print Head Signal Cable
vare #: 144669191

Anycubic 3D Printer Print Head Signal Cable

88% av respondentene vil anbefale dette til en venn

vare #: 144669191

NOK 349

Prisdetaljer

Eksklusive frakt- og tollkostnader ( Frakt- og tollkostnader beregnes ved kassen )

*Alle varer importeres fra USA

På lager
USA Importert fra USA-butikk
Bestill nå, så får du den omkring Lørdag, September 19
Sikker transaksjonSikker transaksjon

Ubuy arbeider hardt for å beskytte din sikkerhet og personvern. Vårt avanserte betalingssikkerhetssystem sikrer konfidensialitet ved å kryptere informasjonen din under overføring ved hjelp av AES (Advanced Encryption Standards) og SSL (Secure Socket Layer)-protokoller. Betalingsopplysningene dine er 100 % sikre da vi ikke deler betalingsopplysningene dine med tredjepartsselgere.

Våre beste leveringspartnere
  • fedex
  • dhl
Factory original wire harness is specifically designed to connect directly to the print head assembly ensuring accurate link stability between components.
U-Care-garanti:
Ingen
Velg en plan
fast shipping

Fast
Shipping

free return

Gratis
retur*

Sikret innpakking

Sikret innpakking

100 % originale produkter

100 % originale produkter

pci-dss

PCI DSS-samsvar

iso certified

ISO 27001-sertifisert

paypal payment
visa payment
mastercard payment
Note: Step Down Voltage Transformer required for using electronics products of USA store (110-120). Recommended power converters Kjøp nå.

Det som utmerker seg

Compatibility
Designed specifically for Anycubic Kobra series, ensuring seamless integration and functionality for Kobra 3, Kobra 3 Combo, Kobra 3 V2, and Kobra 3 V2 Combo printers.
Durable Material
Constructed with high-quality materials to enhance longevity and resist wear, providing a reliable connection for consistent 3D printing performance.
Easy Installation
User-friendly design allows for quick and straightforward installation, making it accessible for both beginners and experienced users to maintain their printer efficiently.

Produkt detaljer

Shop Anycubic 3D Printer Print Head Signal Cable online at a best price in NORGE. B0F4X6WH8B
Connector TypeUsb
Cable TypeUSB
Compatible DevicesKobra 3 Combo 3D Printer
Compatible Phone ModelsNo Compatible Phone Models
Connector GenderMale-to-Male
Number of Pins10
Maximum Voltage5 volts
Recommended Uses For ProductConnecting 3D printer to print head
Indoor Outdoor UsageIndoor
Unit Count1 Count
Number of Items1
Brand NameANYCUBIC
Model00840432424223
ManufacturerANYCUBIC
Global Trade Identification Number00840432424223
Included Components3D Printer Accessory
Part NumberFBA-S010232-NEW-2
BrandANYCUBIC
Item Weight0.2 lbs (90 grams)

Hvem passer produktet for?

Suitable For
  • Anycubic Owners

    Ideal for users of Anycubic Kobra printers needing a reliable replacement for their print head signal cable.

  • Repair Technicians

    Perfect for technicians repairing 3D printers who require compatible wiring for Anycubic Kobra series printers.

  • Hobbyist Upgraders

    Great for hobbyists looking to upgrade or replace faulty printhead wiring to enhance their printing experience.

Not Suitable For
  • Other Brands

    Not suitable for users with non-Anycubic 3D printers as it is specifically designed for Kobra models.

PRODUKTBESKRIVELSE

Anycubic 3D Printer Print Head Signal Cable

Har du noen spørsmål? Chat med oss

Kundespørsmål og svar

  • Spørsmål: What is the purpose of the Anycubic 3D Printer Print Head Signal Cable?

    Svar: The Anycubic 3D Printer Print Head Signal Cable is designed to transmit data and power between the printer's mainboard and the print head assembly. This high-quality cable ensures that the communication is clear and seamless, which is crucial for effective printing. If you experience issues with your prints, such as incomplete layers or erratic extrusions, checking the condition of your signal cable can be vital, as a damaged cable can lead to inconsistencies in print quality.
  • Spørsmål: How do I know if I need a new print head signal cable?

    Svar: Signs that you may need a new print head signal cable include intermittent printing errors, misaligned layers, or failure to heat up correctly. Inspect the cable for visible wear, fraying, or kinks. Often, issues that are attributed to software or calibration can actually stem from a faulty signal cable, so it’s a good idea to troubleshoot this element when facing printing challenges.
  • Spørsmål: Can the Anycubic Print Head Signal Cable be used with other brands of 3D printers?

    Svar: The Anycubic Print Head Signal Cable is specifically designed for compatibility with Anycubic 3D printers. While it may physically fit other brands, the wiring and signal configuration may not be suitable, leading to potential malfunctions. To ensure safe and optimal operation, it’s best to use the cable designed for your specific printer model.
  • Spørsmål: What should I consider when replacing the signal cable?

    Svar: When replacing the signal cable, it’s essential to check for compatibility with your specific Anycubic model. Look for the correct length, gauge, and pin configuration to ensure a proper fit. Using the wrong specifications can lead to problems like short circuits or poor signal transmission, which can ultimately affect print performance.
  • Spørsmål: Can a damaged signal cable affect print quality?

    Svar: Absolutely. A damaged signal cable can lead to erratic behaviors during printing, such as uneven flow of filament, inaccurate temperature readings, or communication drops between the print head and the control board. Such inconsistencies can result in poor print quality or failures, making regular inspections of the cable crucial for maintaining optimal printing performance.
  • Spørsmål: Is there a specific way to care for the print head signal cable?

    Svar: Caring for your print head signal cable involves keeping it free from physical stress and avoiding exposure to excessive heat or moisture. Ensure that it's not caught in moving parts and handle it gently during maintenance. Proper cable management can prevent tangles or pinches that cause wear over time.
  • Spørsmål: How can I install the Anycubic Print Head Signal Cable?

    Svar: Installing the Anycubic Print Head Signal Cable typically involves disconnecting the old cable from the mainboard and print head, then connecting the new cable in the reverse manner. Ensure you refer to your printer's manual for any model-specific instructions or diagrams. Taking care during installation will help maintain signal integrity for better print results.
  • Spørsmål: What are some common issues associated with the print head signal cable?

    Svar: Common issues associated with the print head signal cable include data transmission errors, which manifest as printing glitches, layer misalignment, or extruder motor problems. These can arise from wear or damage to the cable, so keeping an eye out and being proactive about replacement can prevent major printing problems down the line.
  • Spørsmål: How often should I check my print head signal cable?

    Svar: It’s a good practice to check your print head signal cable during regular maintenance of your 3D printer. Aim to inspect it after every few print sessions or whenever you experience printing issues. Regular checks can help you catch problems early, thereby ensuring your printer continues to operate at peak efficiency.
  • Spørsmål: Where can I buy the Anycubic 3D Printer Print Head Signal Cable in Norway?

    Svar: You can purchase the Anycubic 3D Printer Print Head Signal Cable from Ubuy, which offers a variety of 3D printing accessories, including specific parts for Anycubic printers. Their platform makes it convenient to find what you need to keep your printer running smoothly and maintain exceptional print quality.

ANYCUBIC 3D Printer Accessories Editorial Review

Anycubic 3D Printer Print Head Signal Cable is an essential accessory for connecting your Kobra 3 Combo 3D Printer's print head, featuring a reliable male-to-male USB connector with 10 pins. Users appreciate the ease of installation, noting it as a perfect replacement part that works seamlessly, making the printing process smoother. However, it's important to note that this cable is not compatible with the Kobra 3 Max model. Overall, this product has received positive feedback for its functionality and compatibility, highlighting its efficiency in the realm of 3D printing.

Kundeanmeldelser og vurderinger

1 kunders vurderinger
  • 5 stjerne
    100%
  • 4 stjerne
    0%
  • 3 stjerne
    0%
  • 2 stjerne
    0%
  • 1 stjerne
    0%

Vurder dette produktet

Del tankene dine med andre kunder

Fordeler

  • Perfect replacement for Kobra 3 Combo
  • Easy installation for quick setup
  • Reliable male-to-male USB connector
  • Efficient connection for 3D printing
  • Lightweight design for easy handling

Ulemper

  • Not compatible with Kobra 3 Max model

Plattformtillit og kjøpstrygghet

trustpilot logo
4.2/5 9300 + anmeldelser
Les anmeldelser
JG
Jazz
Verifisert kjøper

“Easy to use and always helpful and sorts any issues I've had past and present”

1 September 2026 · via Trustpilot
EK
Emmanuel
Verifisert kjøper

“I always receive support when I engage customer service. Overall my experience with UBUY has been top notch. Keep up the good work.”

31 August 2026 · via Trustpilot
F
fnd
Verifisert kjøper

“The delivery was fast and the product came undamaged and authentic.”

29 August 2026 · via Trustpilot
LC
Leana
Verifisert kjøper

“Ubuy is extremely efficient and to order online is an easy process. The verity of products to buy is really unlimited! My order was urgent and I got it on time. The products are great! Thank you Ubuy!”

25 August 2026 · via Trustpilot
HL
Hengo
Verifisert kjøper

“Fast, convenient and cheap. Great store!”

27 August 2026 · via Trustpilot
Sikker utsjekk Global levering Enkel retur Originale produkter

Produktets prishistorikk

Viktig informasjon

  • Begrensninger: For produkter som sendes internasjonalt, vær oppmerksom på at eventuell produsentgaranti kan være ugyldig; produsentens serviceordninger er kanskje ikke tilgjengelige; produktmanualer, instruksjoner og sikkerhetsadvarsler er kanskje ikke på mottakerlandets språk; produktene (og medfølgende materiell) er kanskje ikke utformet i samsvar med mottakerlandets standarder, spesifikasjoner og merkekrav; og produktene samsvarer kanskje ikke med mottakerlandets krav til spenning og andre elektriske standarder (noe som kan kreve bruk av adapter eller omformer om nødvendig). Mottakeren er ansvarlig for å sikre at produktet lovlig kan importeres til mottakerlandet. Ved bestilling fra Ubuy eller dets datterselskaper er mottakeren registrert importør og må overholde alle lover og forskrifter i mottakerlandet.
  • Ikke alle produkter som er oppført på Ubuy er til salgs, da Ubuy er en global søkemotor. Produkter er underlagt eksport-/handelsreguleringer.

NOK 349

Bestill nå, så får du den omkring Lørdag, September 19

Antall:

Sikker transaksjonSikker transaksjon

PCI DSS-kompatibel og ISO 27001:2022-sertifisert, med krypterte betalinger og full kjøperbeskyttelse på hver bestilling.

Våre beste leveringspartnere
  • fedex
  • dhl
Raskeste grenseoverskridende levering

Funksjoner og fordeler

  • Essential print head connection cable for reliable performance.
  • Compatible with Anycubic Kobra 3 and Kobra 3 Combo models.
  • Accurate fit for Kobra 3 V2 and Kobra 3 V2 Combo series.
  • Flat ribbon geometry design ensures optimal wire placement.
  • Original replacement part restores standard printer connections.
  • Easy to install with no modifications required.

Ubuy-garanti

Opplev bekymringsfri shopping med 100 % originale produkter, PCI DSS-kompatibel betalingssikkerhet, ISO 27001-sertifisert databeskyttelse, den raskeste grensekryssende leveringen, gratis retur, og sikker emballasje på hver bestilling.*