0 ratings
vare #:
77954847
BIGTREETECH Pi Control Board 64bit Quad Core, 1GB DDR3L 40-pin GPIO Compatible with SKR MINI E3 V3.0Octopus V1.1Pro, SKR V1.4 TurboKrakenSKR 3 to Run
vare #:
77954847
NOK 669
Price Details
Excluding Shipping & Custom charges ( Shipping and custom charges will be calculated on checkout )
*All items will import from US
0 ratings
Skriv en vurdering
På lager
Importert fra USA-butikk
Bestill nå og få den rundt Tirsdag, Juli 28
Sikker transaksjon
Ubuy arbeider hardt for å beskytte din sikkerhet og personvern. Vårt avanserte betalingssikkerhetssystem sikrer konfidensialitet ved å kryptere informasjonen din under overføring ved hjelp av AES (Advanced Encryption Standards) og SSL (Secure Socket Layer)-protokoller. Betalingsopplysningene dine er 100 % sikre da vi ikke deler betalingsopplysningene dine med tredjepartsselgere.
Våre beste leveringspartnere
BTT PI V1.2 Control Board size is 85*56mm, the same as the Raspberry Pi 3B/4B, Making it a seamless fit for your existing projects.
Fast
Shipping
Gratis
retur*
Sikret innpakking
100 % originale produkter
PCI DSS Compliance
ISO 27001 Certified
Note: Step Down Voltage Transformer required for using electronics products of US store (110-120). Recommended power converters Kjøp nå.
Hva skiller seg ut
Kraftig ytelse
Equipped with a 64-bit quad-core processor and 1GB DDR3L, this control board ensures seamless operation for complex 3D printing tasks, allowing for faster processing and improved efficiency.
Allsidig kompatibilitet
Designed to work with a variety of 3D printer models including Voron, CoreXY, and I3, this board's 40-pin GPIO supports widespread integration, making it ideal for both DIY enthusiasts and professional users.
Enhanced Connectivity
The BIGTREETECH Pi V1.2 offers extensive connectivity options, enabling seamless communication with popular firmware like Klipper, optimizing performance, and providing advanced control features for precision 3D printing.
Produkt detaljer
- BIGTREETECH Pi V1.2 Control board with ALLWINNER H616 64-bit Quad-core [email protected] Processor and 1GB DDR3L SDRAM
- Compatible with SKR MINI E3 V3.0, SKR Pico, SKR V1.4 turbo, Octopus pro/Octopus series to run Klipper firmware
- Compact size of 85*56mm, same as Raspberry Pi 3B/4B for seamless integration into existing projects
- Supports OpenGL3.2 and HDMI 2.0A UHD 4K Video & Audio output, SPI screen, onboard 4xUSB2.0 port, 40-pin GPIO header, 3.5mm Audio Jack, TF card Slot, ADXL345 SPI, USB to CAN Module, RJ45 port, and built-in 2.4G Wifi module
- Flexible power options with support for USB-C 5V power supply and DC12V-24V from a 3D Printer, eliminating the need for extra adapters or power sources
- Equipped with 1GB RAM, microSD card slot for Debian 11 with Klipper, 4K capable micro HDMI port, Fast Ethernet and WiFi 4 networking, and four USB ports
| RAM-minne installert | 1 GB |
| Prosessorhastighet | 1.5 GHz |
| Tilkoblingsteknologi | Ethernet, GPIO, HDMI, USB, Wi-Fi |
| Operativsystem | Linux |
| Processor Brand | Allwinner |
| Wireless Compability | Bluetooth |
| Kompatible enheter | SKR MINI E3 V3.0, SKR Pico, SKR V1.4 turbo, SKR 3, Kraken, Octopus pro, Octopus V1.1 series |
| RAM Memory Technology | DDR3L |
| Processor Count | 4 |
| Total Usb Ports | 4 |
| Smart Home Kompatibilitet | Not Smart Home Compatible |
| Vare dimensjoner L x B x H | 3.3"L x 2.52"W x 0.03"H (8.4 x 6.4 x 0.1 cm) |
| Merke | BIGTREETECH-Direct |
| Modellnavn | BIGTREETECH Pi |
| Innebygd media | BTT PI |
| Modellnummer | PI V1.2 |
| Mfr Delenummer | BIGTREETECH |
| Produsent | BIGTREETECH Direct |
| Enhetsantall | 1.0 Antall |
| Ram Memory Installert størrelse | 1 GB |
| CPU-hastighet | 1.5 GHz |
Who Should Buy?
-
Avanserte brukere
Ideal for experienced 3D printing enthusiasts seeking customization and advanced control for their printers.
-
Klipper Users
Designed specifically for users running Klipper firmware to enhance performance on various 3D printer models.
-
DIY Printers
Perfect for building or modifying DIY 3D printers like Voron and CoreXY setups with advanced features.
-
Nybegynnere
Not suitable for novice users due to the complexity of setup and configuration required.
PRODUKTBESKRIVELSE
BIGTREETECH Pi Control Board 64bit Quad Core, 1GB DDR3L 40-pin GPIO Compatible with SKR MINI E3 V3.0Octopus V1.1Pro, SKR V1.4 TurboKrakenSKR 3 to Run Klipper
Har du noen spørsmål? Chat med oss
Spørsmål og svar for kunde
-
spørsmål:
What are the key features of the BIGTREETECH Pi Control Board?
svar: The BIGTREETECH Pi Control Board features a powerful 64-bit quad-core processor and 1GB DDR3L RAM, allowing efficient performance for 3D printing applications. The 40-pin GPIO ensures compatibility with various peripherals and devices, making it versatile for different setups. This board is specially designed to work with popular motherboard models like SKR Mini E3 V3.0, Octopus V1.1/Pro, and SKR V1.4 Turbo, among others, which enhances its usability. This combination of features makes it suitable for both hobbyists and professionals seeking optimal performance in their 3D printing projects. -
spørsmål:
How does the BIGTREETECH Pi Control Board enhance 3D printing with Klipper?
svar: The BIGTREETECH Pi Control Board is specifically optimized for running Klipper, a high-performance 3D printing firmware. By leveraging the board's 64-bit processing capabilities, Klipper enables faster processing of motion commands, resulting in improved print quality and speed. Moreover, the board's capability to handle advanced algorithms allows for more sophisticated control of your printer. Users who seek higher precision and efficiency in complex prints will find this board to be an essential upgrade for their 3D printing systems. -
spørsmål:
Is the BIGTREETECH Pi Control Board compatible with other printing setups?
svar: Yes, the BIGTREETECH Pi Control Board is designed to be compatible with a variety of 3D printer setups. Its GPIO pins provide a straightforward method for connecting with various components and systems, including mainstream motherboards like the SKR Mini E3 V3.0 and others. This broad compatibility makes it an attractive option for users looking to customize their printers or integrate new technologies. Whether you are updating an old printer or building a new one, this board offers the flexibility needed for different configurations. -
spørsmål:
What kind of power supply is required for the BIGTREETECH Pi Control Board?
svar: The BIGTreetech Pi Control Board generally requires a standard power supply of 5V, which is common for many Raspberry Pi-based systems. It is essential to ensure that the power supply can provide stable voltage and sufficient current to support the board along with any connected devices. Users typically connect it to their existing 3D printer power systems or use dedicated Raspberry Pi power supplies. Ensuring proper power management is key for maintaining reliability and optimal performance during printing operations. -
spørsmål:
Can I connect multiple devices to the BIGTREETECH Pi Control Board?
svar: Yes, the BIGTREETECH Pi Control Board supports multiple device connections through its 40-pin GPIO header, allowing you to integrate various components such as sensors, drivers, and other peripherals. This feature enables users to customize their setups extensively, enhancing functionality and performance. For instance, you can connect additional stepper motors, fans, or temperature sensors to tailor your 3D printing experience. This versatility is particularly beneficial for tinkerers and advanced users who seek to optimize their printer's capabilities. -
spørsmål:
What are the installation requirements for the BIGTREETECH Pi Control Board?
svar: To install the BIGTREETECH Pi Control Board, you'll need compatible hardware, including a power supply, a suitable 3D printer motherboard, and Klipper firmware installed on a Raspberry Pi. Users will also typically require basic tools such as screwdrivers and the appropriate cables for connections. Following the manufacturer's instructions and using online resources for setup and configuration is recommended. Properly following these installation steps ensures that you can maximize your printing performance and enjoy a seamless 3D printing experience. -
spørsmål:
What software do I need to run with the BIGTREETECH Pi Control Board?
svar: To effectively utilize the BIGTREETECH Pi Control Board, you'll need to install Klipper firmware on your Raspberry Pi. This software interfaces with your printer's hardware, allowing you to take full advantage of the board’s features. Additionally, you might consider installing a host program such as OctoPrint for enhanced control and monitoring of your 3D prints. The combination of Klipper and compatible software creates a robust environment that can significantly improve print quality and efficiency. -
spørsmål:
Where can I buy the BIGTREETECH Pi Control Board in Norway?
svar: You can purchase the BIGTREETECH Pi Control Board from Ubuy in Norway. Ubuy provides a convenient online shopping platform, offering a variety of tech products including this specific board. Shopping through Ubuy not only helps you find the product easily but also ensures access to support and additional information regarding your purchase. -
spørsmål:
What types of 3D printers benefit most from the BIGTREETECH Pi Control Board?
svar: The BIGTREETECH Pi Control Board is ideal for a wide range of 3D printers, particularly those that demand high-speed operation and precision. It's especially beneficial for delta and CoreXY printers, where precise control over motion is crucial for achieving optimal print quality. The board’s advanced processing capabilities paired with Klipper firmware help streamline the printing process, making it suitable for both common and specialized applications. Users looking to enhance performance in their existing printers will find this board to be an excellent choice. -
spørsmål:
What is the role of the GPIO pins on the BIGTREETECH Pi Control Board?
svar: The GPIO pins on the BIGTREETECH Pi Control Board serve as a pivotal connection point for integrating various components. They allow users to connect sensors, motors, and other peripherals, enabling enhanced control and customization of 3D printing setups. Each pin can be programmed to perform distinct functions such as signal processing, power distribution, or communication with other hardware. This adaptability equips users to expand their printer capabilities significantly and tailor their systems based on their individual needs.
BIGTREETECHDirect 3D Printer Controllers Editorial Review
The BIGTREETECH BTT Pi V1.2 is a cost-effective alternative to the Raspberry Pi, suitable for DIY projects such as setting up Klipper for 3D printers. While it is compatible with displays like the BTT TFT32, it does not support Pi camera and requires a USB camera instead. Customer reviews indicate that the board is highly functional and reliable, with users praising its performance in running Klipper and powering linear motion devices. The board's pin layout differs from a Raspberry Pi, making Raspberry Pi cases incompatible, but specific mounts are available on Thingiverse. However, some users have expressed concerns about the lack of clear documentation from BIGTREETECH. Overall, the BIGTREETECH BTT Pi V1.2 is recommended for DIYers looking for an affordable and reliable alternative to Raspberry Pi for various projects. **
Kundeanmeldelser og vurderinger
1 kunders vurderinger
-
5 stjerne
100%
-
4 stjerne
0%
-
3 stjerne
0%
-
2 stjerne
0%
-
1 stjerne
0%
Vurder dette produktet
Del tankene dine med andre kunder
Fordeler
- Cost-effective alternative to Raspberry Pi
- Reliable performance for running Klipper and powering linear motion devices
- Compatible with BTT TFT32 display
- Specific mounts available on Thingiverse for fitting the board
Ulemper
- Lack of clear documentation from the manufacturer
Platform Trust & Buyer Confidence
MT
Mohd
Verified buyer
“The product received very good packaging & safe…Thank You”
16 June 2026 · via Trustpilot
SJ
Shawati
Verified buyer
“Accurate delivery timing given”
16 June 2026 · via Trustpilot
YB
Youcef
Verified buyer
“Not madly expensive like I thought, and much quicker than promised.”
15 June 2026 · via Trustpilot
LM
Leila
Verified buyer
“Never dealt with Ubuy before, but everything worked out great. Seamless cross border purchasing and shipping. Thanks!”
6/7/2026 · via Trustpilot
KA
Kwame
Verified buyer
“The process was smooth, with clear communication and timelines. This was my 1st purchase and I am really impressed. I will definitely be coming back.”
12 June 2026 · via Trustpilot
Sikker utsjekk
Global Delivery
Enkel retur
Genuine Products
Produktets prishistorikk
Viktig informasjon
- Begrensninger: For produkter som fraktes internasjonalt, vennligst merk at eventuell produsentgaranti kanskje ikke er gjeldende; produsentens tjenestealternativer er kanskje ikke tilgjengelige; produktveiledninger, instrukser og sikkerhetsadvarsler er kanskje ikke tilgjengelig på destinasjonslandets språk; produktene (og medfølgende materiell) er kanskje ikke laget i samsvar med destinasjonslandets standarder, spesifikasjoner og krav om merking; og det kan være at produktene ikke har samme spenningsgrad og elektriske standard som destinasjonslandet eller ikke følger (det må brukes adapter eller strømomformer der dette gjelder). Mottakeren er ansvarlig for å forsikre seg om at produktet lovlig kan importeres til destinasjonslandet. Ved bestilling fra Ubuy eller deres partnere er mottakeren den registrerte importøren, og må etterleve alle lover og reguleringer i destinasjonslandet.
- Ikke alle produktene som er opplistet hos Ubuy er til salgs, siden Ubuy er en global søkemotor. Produkter er underlagt reguleringer for eksport og handel.
NOK 669
Bestill nå og få den rundt Tirsdag, Juli 28
This item is not restrict in my country.(Please click on above link if this item is not restrict in your country, So our team will review and allow.)
QTY:
Sikker transaksjon
PCI DSS compliant and ISO 27001:2022 certified, with encrypted payments and full buyer protection on every order.
Våre beste leveringspartnere
Rask levering over grenser
Funksjoner og fordeler
- Raspberry Pi-sized Allwinner H616 single board computer (SBC) designed for 3D printers
- Equipped with 1GB RAM, microSD card slot, 4K capable micro HDMI port, Fast Ethernet, WiFi 4, and four USB ports
- Supports SKR MINI E3 V3.0, SKR Pico, SKR V1.4 turbo, Octopus pro/Octopus series with Klipper firmware
- Offers rich connectivity with 40-pin GPIO header, audio jack, TF card slot, ADXL345 SPI, USB To CAN Module, built-in IR Receiver, RJ45 port, and 2.4G WiFi module
- Flexible power options with support for USB-C 5V power supply and DC12V-24V from a 3D printer
Ubuy Assurance
Experience worry-free shopping with 100% original products, PCI DSS-compliant payment security, ISO 27001-certified data protection, the fastest cross-border delivery, free returns *, and secure packaging on every order.