What is the 0CB20 PLC Programming Cable used for?

The 0CB20 PLC Programming Cable is designed for connecting Siemens S7 PLCs, specifically models 200, 300, and 400, to a computer for programming and configuration tasks. It serves as a crucial interface for transferring data and commands between the PLC and your programming software, ensuring smooth communication. Utilizing this cable is advantageous when setting up or monitoring PLC systems, troubleshooting, or updating configurations remotely.

Is the 0CB20 PLC Programming Cable compatible with all Siemens PLCs?

The 0CB20 PLC Programming Cable is specifically compatible with Siemens S7 series PLCs, including models 200, 300, and 400. However, it may not work with non-Siemens PLC models, so it's essential to check compatibility before purchasing. For users working exclusively within the Siemens ecosystem, this cable provides reliable performance and connectivity, making it a necessary tool for programmers and technicians.

What are the features of the 0CB20 PLC Programming Cable?

The 0CB20 PLC Programming Cable features an isolated interface that protects against electrical noise and spikes, ensuring reliable communication between devices. It's designed with USB connectivity for ease of use with modern computers, and facilitates straightforward setup with S7 touch screens and panels. This makes it particularly useful in industrial settings where PLCs are used to automate processes, allowing for efficient programming and diagnostics.

Can I use the 0CB20 PLC Programming Cable with my TP Touch Screen?

Yes, the 0CB20 PLC Programming Cable is compatible with TP Touch Screens associated with Siemens S7 PLCs. This cable enables effective programming of the touch panel, allowing users to configure settings and transfer data easily. It's particularly useful for those managing HMI systems, ensuring that the touch screens are properly set up to interact with the PLC for real-time monitoring and control.

How do I install the 0CB20 PLC Programming Cable?

To install the 0CB20 PLC Programming Cable, first connect the USB end to your computer and the connector to the corresponding port on the Siemens PLC. Then, install any necessary drivers or software that supports the communication protocol used by your PLC model. Following these steps ensures that your computer recognizes the PLC, enabling seamless programming sessions and interactions with the device.

Is the 0CB20 PLC Programming Cable plug-and-play?

Yes, the 0CB20 PLC Programming Cable is designed to be largely plug-and-play, allowing for simple installation. After connecting it to your computer and PLC, most systems will recognize the device automatically. This feature minimizes the complexity of setup and lets users get started with programming their PLCs quickly without extensive configuration.

What software is compatible with the 0CB20 PLC Programming Cable?

The 0CB20 PLC Programming Cable can be used with various Siemens programming software such as STEP 7 and TIA Portal. These platforms provide the necessary tools for programming PLCs and configuring their operational parameters. Users working with these software options will find the cable indispensable for ensuring proper communication between their computer and PLC devices, enhancing productivity in automation projects.

What is the length of the 0CB20 PLC Programming Cable?

The 0CB20 PLC Programming Cable typically comes with a length adequate for most industrial and control room setups. Offering flexibility in terms of workspace arrangement, this cable length allows users to connect their PLCs with ease without the limitation of a short reach, thus improving accessibility during programming and troubleshooting sessions.

Where can I buy the 0CB20 PLC Programming Cable for S7 200 300 400?

You can buy the 0CB20 PLC Programming Cable for S7 200, 300, and 400 at Ubuy. They offer a variety of options making it convenient for quick access to the cable needed for your programming needs. Ubuy ensures a seamless purchasing experience, providing you with everything needed for your Siemens PLC programming tasks.

Hvor lang tid tar det å få produktet etter bestillingen?

Leveringstiden for det bestilte produktet ditt varierer i henhold til hva du har bestilt og fraktmetoden du har valgt.. Den estimerte leveringstiden er nevnt under utsjekkingsprosessen, så vær bekymringsløs mens du handler.

DCYNXC Se original

0CB20 PLC Programming Cable for S7 200 300 400, for TP Touch Screen, USB Touch Panel Programming Cable, Isolated Interface, for 6ES7972-0CB20-0XA0 Replacement, New

DCYNXC

vare #: 69603931

0CB20 PLC Programming Cable for S7 200 300 400, for TP Touch Screen, USB Touch Panel Programming Cable, Isolated Interface, for 6ES7972-0CB20-0XA0

79% av respondentene vil anbefale dette til en venn

vare #: 69603931

NOK 835

Prisdetaljer

Eksklusive frakt- og tollkostnader ( Frakt- og tollkostnader beregnes ved kassen )

^{*Alle varer importeres fra USA}

Tilgjengelighet : På lager

Importert fra USA-butikk

Antall:

Bestill nå, så får du den omkring Monday, September 21

Sikker transaksjon

Våre beste leveringspartnere

U-Care-garanti:

Ingen

Velg en plan

Fast
Shipping

Gratis
retur^*

Sikret innpakking

100 % originale produkter

PCI DSS-samsvar

ISO 27001-sertifisert

Note: Step Down Voltage Transformer required for using electronics products of USA store (110-120). Recommended power converters Kjøp nå.

Det som utmerker seg

USB Compatibility

Easily connects to various Siemens S7 PLC models, providing seamless programming and monitoring through standard USB interfaces for both reliability and convenience.

Isolated Interface

Protects your devices from electrical noise and surges, ensuring system stability and minimizing the risk of damage during programming sessions.

Replacement Assurance

Designed as a direct replacement for the 6ES7972-0CB20-0XA0 model, guaranteeing compatibility and enhancing productivity for existing setups in industrial environments.

Produkt detaljer

Ideal replacement for 6ES7972-0CB20-0XA0, with DP/PPI/MPI protocols integrated
Supports program/data transfer between computer and PLC S7 200 /300/400/ET200 and OP/TP touch panel
Compatible with programming of 840D CNC system, with USB to RS485/DP/PPI/MPI programming cable
High speed up to 187.5kbps, no driver installation required for STEP 7 V5.5 and above
Provides safety and protection with embedded optical coupler and PTC self-recovery fuse
Supports UART data format, data bit: 8, stop bit: 1 and 2, parity bit: odd/even/no parity

Connector Type	USB Type A
Cable Type	Lightning, USB
Compatible Devices	Scanner
Other Special Features of the Product	High Speed
Compatible Phone Models	Siemens S7
Connector Gender	Male-to-Male
Data Transfer Rate	187.5 kilobits_per_second
Number of Pins	4
Frequency	187500 hertz
Recommended Uses For Product	PLC programming and data transfer for Siemens 200/300/400 series and OP/TP touch panels, supporting 840D CNC system programming
Specification Met	Siemens Compatibility
Indoor Outdoor Usage	Indoor, Outdoor
Item Shape	Flat
Brand Name	DCYNXC
Model Name	DCYNXC 0CB20
Model	0CB20
Item Length	2.5 meters
Manufacturer	DCYNXC
Part Number	0CB20
Unit Count	1 Count
Item Weight	0.26 kg
Brand	DCYNXC
Special Feature	High Speed
Country of Origin	This item will be imported from US
Date First Available	July 27, 2022
What is in the box	0CB20 PLC Programming Cable... For more details, please check description/product details

Hvem passer produktet for?

Automation Engineers
Ideal for engineers needing to program or troubleshoot Siemens S7 PLCs and related touch panels efficiently.
Industrial Technicians
Technicians can effectively connect and program Siemens devices in manufacturing setups using this reliable cable.
Hobbyist Programmers
Great for hobbyists exploring PLC programming and automation projects with Siemens touch screen devices.

Home Users
Not suitable for casual home users unfamiliar with programming and industrial automation systems.

PRODUKTBESKRIVELSE

0CB20 PLC Programming Cable for S7 200 300 400, for TP Touch Screen, USB Touch Panel Programming Cable, Isolated Interface, for 6ES7972-0CB20-0XA0 Replacement, New

Har du noen spørsmål? Chat med oss

Kundespørsmål og svar

Spørsmål: Hvordan handle 0CB20 PLC Programming Cable for S7 200 300 400, for online fra Ubuy?

Svar: Det er enkelt å handle 0CB20 PLC Programming Cable for S7 200 300 400, for online fra Ubuy.. Du trenger bare å søke etter produktet, velge fraktmetode mens du sjekker ut og få det levert til ditt sted.
Spørsmål: Er 0CB20 PLC Programming Cable for S7 200 300 400, for tilgjengelig for nettbutikk i Norway?

Svar: Ja, hos Ubuy Norway er dette produktet tilgjengelig for deg å handle til en rimelig pris.. 0CB20 PLC Programming Cable for S7 200 300 400, for er ikke tilgjengelig lokalt, men du kan stole på oss med våre ekspressfrakttjenester.
Spørsmål: Hvor lang tid tar det å få produktet etter bestillingen?

Svar: Leveringstiden for det bestilte produktet ditt varierer i henhold til hva du har bestilt og fraktmetoden du har valgt.. Den estimerte leveringstiden er nevnt under utsjekkingsprosessen, så vær bekymringsløs mens du handler.

DCYNXC USB Cables Editorial Review

Ingen redaksjonelle anmeldelser funnet

Kundeanmeldelser og vurderinger

5.0

1 kunders vurderinger

5 stjerne

100%
4 stjerne

0%
3 stjerne

0%
2 stjerne

0%
1 stjerne

0%

Vurder dette produktet

Del tankene dine med andre kunder

Produktets prishistorikk

Viktig informasjon

Begrensninger: For produkter som sendes internasjonalt, vær oppmerksom på at eventuell produsentgaranti kan være ugyldig; produsentens serviceordninger er kanskje ikke tilgjengelige; produktmanualer, instruksjoner og sikkerhetsadvarsler er kanskje ikke på mottakerlandets språk; produktene (og medfølgende materiell) er kanskje ikke utformet i samsvar med mottakerlandets standarder, spesifikasjoner og merkekrav; og produktene samsvarer kanskje ikke med mottakerlandets krav til spenning og andre elektriske standarder (noe som kan kreve bruk av adapter eller omformer om nødvendig). Mottakeren er ansvarlig for å sikre at produktet lovlig kan importeres til mottakerlandet. Ved bestilling fra Ubuy eller dets datterselskaper er mottakeren registrert importør og må overholde alle lover og forskrifter i mottakerlandet.
Ikke alle produkter som er oppført på Ubuy er til salgs, da Ubuy er en global søkemotor. Produkter er underlagt eksport-/handelsreguleringer.

NOK 835

Bestill nå, så får du den omkring Monday, September 21

Antall:

Sikker transaksjon

PCI DSS-kompatibel og ISO 27001:2022-sertifisert, med krypterte betalinger og full kjøperbeskyttelse på hver bestilling.

Våre beste leveringspartnere

Raskeste grenseoverskridende levering

Ubuy-garanti

Opplev bekymringsfri shopping med 100 % originale produkter, PCI DSS-kompatibel betalingssikkerhet, ISO 27001-sertifisert databeskyttelse, den raskeste grensekryssende leveringen, gratis retur, og sikker emballasje på hver bestilling.*

0CB20 PLC Programming Cable for S7 200 300 400, for TP Touch Screen, USB Touch Panel Programming Cable, Isolated Interface, for 6ES7972-0CB20-0XA0

NOK 835

Fast Shipping

Gratis retur*

Sikret innpakking

100 % originale produkter

PCI DSS-samsvar

ISO 27001-sertifisert

Det som utmerker seg

Produkt detaljer

Hvem passer produktet for?

PRODUKTBESKRIVELSE

Kundespørsmål og svar

DCYNXC USB Cables Editorial Review

Kundeanmeldelser og vurderinger

Vurder dette produktet

Produktets prishistorikk

Viktig informasjon

NOK 835

Ubuy-garanti

Fast
Shipping

Gratis
retur^*