Marine Tech Tools Mercruiser Gimbal Bearing Puller, Gimbal Bearing Removal & Install Tool for Mercruiser Alpha One Alignment Tool, MR, Bravo, OMC, Cobra and Volvo
genuine image
Marine Tech Tools Mercruiser Gimbal Bearing Puller, Gimbal Bearing Removal & Install Tool for Mercruiser Alpha One Alignment Tool, MR, Bravo, OMC, Cobra and Volvo
This innovative design of gimbal bearing removal tool is built to give you a breeze in removing gimbal bearings from your outboard motors. It is the easiest way to remove the bell housing gimbal bearing on most common out-drives. It locks into the gimbal bearing and can not slip off.
Marine Tech Tools Mercruiser Gimbal Bearing Puller, Gimbal Bearing Removal & Install Tool for Mercruiser Alpha One Alignment Tool, MR, Bravo, OMC, Cobra and Volvo
vare #: 27595263

Marine Tech Tools Mercruiser Gimbal Bearing Puller, Gimbal Bearing Removal & Install Tool for Mercruiser Alpha One Alignment Tool, MR, Bravo, OMC,

vare #: 27595263

NOK 2603

Prisdetaljer

Excluding Shipping & Custom charges ( Shipping and custom charges will be calculated on checkout )

*All items will import from USA

På lager
USA Importert fra USA-butikk

Antall:

Bestill nå, så får du den omkring Onsdag, August 26
Sikker transaksjonSikker transaksjon

Ubuy arbeider hardt for å beskytte din sikkerhet og personvern. Vårt avanserte betalingssikkerhetssystem sikrer konfidensialitet ved å kryptere informasjonen din under overføring ved hjelp av AES (Advanced Encryption Standards) og SSL (Secure Socket Layer)-protokoller. Betalingsopplysningene dine er 100 % sikre da vi ikke deler betalingsopplysningene dine med tredjepartsselgere.

Våre beste leveringspartnere
  • fedex
  • dhl
This innovative design of gimbal bearing removal tool is built to give you a breeze in removing gimbal bearings from your outboard motors. It is the easiest way to remove the bell housing gimbal bearing on most common out-drives. It locks into the gimbal bearing and can not slip off.
U-Care-garanti:
Ingen
Velg en plan
fast shipping

Fast
Shipping

free return

Gratis
retur*

Sikret innpakking

Sikret innpakking

100 % originale produkter

100 % originale produkter

pci-dss

PCI DSS-samsvar

iso certified

ISO 27001-sertifisert

paypal payment
visa payment
mastercard payment
Note: Step Down Voltage Transformer required for using electronics products of USA store (110-120). Recommended power converters Kjøp nå.

Det som utmerker seg

Allsidig kompatibilitet
Designed for Mercruiser Alpha One and compatible with MR, Bravo, OMC, Cobra, and Volvo, ensuring broad usability across various marine engines, making it a must-have tool for marine professionals.
Efficient Removal
This puller simplifies gimbal bearing removal and installation, significantly reducing time and effort compared to manual methods, enhancing overall efficiency in marine maintenance tasks.
Holdbar konstruksjon
Built with high-quality materials for longevity and reliability, ensuring this tool withstands tough marine environments, offering exceptional value to users seeking dependable and long-lasting equipment.

Produkt detaljer

Find the best deals on Marine Tech Tools Gimbal Bearing Puller at Ubuy NORGE. This tool fits on Mercruiser Alpha, Alpha 1, MR, Bravo, OMC, Cobra, and Volvo. Shop now!

Hvem passer produktet for?

Suitable For
  • Boat Mechanics

    Professional mechanics will find this tool essential for efficient gimbal bearing removal and installation on various boat models.

  • Gjør-det-selv-entusiaster

    Individuals looking to perform maintenance on their boats will benefit from this tool for its ease of use.

  • Marina Services

    Marinas offering repair and maintenance services can use this tool for quick and reliable gimbal bearing jobs.

Not Suitable For
  • Casual Boaters

    Occasional boat owners may not need this specialized tool for infrequent maintenance or repairs.

PRODUKTBESKRIVELSE

Marine Tech Tools Mercruiser Gimbal Bearing Puller, Gimbal Bearing Removal & Install Tool for Mercruiser Alpha One Alignment Tool, MR, Bravo, OMC, Cobra and Volvo

Har du noen spørsmål? Chat med oss

Spørsmål og svar fra kunder

  • Spørsmål: What is the purpose of the Marine Tech Tools Mercruiser Gimbal Bearing Puller?

    Svar: The Marine Tech Tools Mercruiser Gimbal Bearing Puller is designed to efficiently remove and install gimbal bearings in various Mercruiser models. This tool simplifies the process, making it conducive for both amateur and experienced boat mechanics. Proper removal and installation of gimbal bearings are critical for ensuring smooth operation and alignment of the engine and drive system in your watercraft, preventing damage during use.
  • Spørsmål: Which Mercruiser models are compatible with this tool?

    Svar: This gimbal bearing puller is compatible with Mercruiser Alpha One, MR, Bravo, and certain OMC models. The versatility of the tool caters to a wide range of boat owners who wish to perform maintenance on their Mercruiser engines. By ensuring compatibility with several popular models, this tool serves as an essential item for professional repair shops and DIY enthusiasts alike.
  • Spørsmål: Why should I use a specialized tool for gimbal bearing removal?

    Svar: Using a specialized tool like the Marine Tech Tools Mercruiser Gimbal Bearing Puller is essential because it is specifically designed to handle the complexities of bearing removal without causing damage. Many standard tools may not provide the precise grip or leverage needed, leading to potential damage to the hull or the bearings themselves. Utilizing the right tool not only ensures efficiency but also promotes the longevity of your boat's drivetrain components.
  • Spørsmål: Can I perform the gimbal bearing replacement at home?

    Svar: Yes, you can perform gimbal bearing replacements at home provided you have the right tools and a basic understanding of marine mechanics. The Marine Tech Tools gimbal bearing puller makes the process manageable for DIY enthusiasts. It's important to follow detailed instructions and take safety precautions while working. This tool can help you avoid costly professional service by allowing you to tackle the job yourself.
  • Spørsmål: Is the gimbal bearing puller easy to use?

    Svar: Yes, the Marine Tech Tools Gimbal Bearing Puller is designed for ease of use, even for those with limited mechanical experience. Its ergonomic design and intuitive setup contribute to a straightforward removal and installation process. Additionally, instructional resources and user manuals available online can further guide you, making this tool accessible for effective use in various maintenance scenarios.
  • Spørsmål: What materials is the gimbal bearing puller made from?

    Svar: The Marine Tech Tools Mercruiser Gimbal Bearing Puller is constructed from high-quality steel, ensuring durability and resistance to wear and tear. The strong material allows it to withstand the pressures involved in bearing removal and installation. This means you can rely on the tool for multiple uses without worrying about compromising its performance.
  • Spørsmål: What other tools do I need for a complete bearing service?

    Svar: In addition to the Marine Tech Tools Gimbal Bearing Puller, you might need a torque wrench to secure the new bearing, a socket set for various fasteners, and a punch or mallet for precise adjustments. Having these tools on hand, along with proper safety equipment, will streamline the entire gimbal bearing service process, ensuring that every aspect of the job is handled professionally.
  • Spørsmål: How long does it take to replace gimbal bearings using this tool?

    Svar: The time it takes to replace gimbal bearings using the Marine Tech Tools Puller can vary but typically ranges from one to three hours depending on your experience and the specific model. With the right preparation and knowledge, this tool can facilitate a quick and efficient process. Being organized and familiarizing yourself with the steps will help reduce time and improve the ease of completion.
  • Spørsmål: Where can I buy Marine Tech Tools Mercruiser Gimbal Bearing Puller in Norway?

    Svar: You can purchase the Marine Tech Tools Mercruiser Gimbal Bearing Puller from Ubuy in Norway. Ubuy offers a user-friendly online shopping experience and a range of marine tools tailored to your needs. With access to quality products and detailed descriptions, Ubuy is a reliable choice for securing the right equipment for your boat maintenance tasks.
  • Spørsmål: Are there any maintenance tips for the gimbal bearing puller?

    Svar: To keep your Marine Tech Tools Gimbal Bearing Puller in good working condition, always clean it after use to prevent debris build-up. Store the tool in a dry place to protect it from rust and corrosion. Regularly inspect the pulling mechanism and joints for wear. Proper maintenance ensures that your puller remains effective and extends its lifespan, ultimately saving you time and money in the long run.

M Marine Tech Tools Tools Editorial Review

The Marine Tech Tools Gimbal Bearing Puller tool receives very positive reviews overall, with many customers highly recommending it. Reviewers highlight that it is much quicker and easier to use than the older style of pullers, with one reviewer noting that it is half the price of name-brand alternatives. Some users suggest that adequate lubrication of the threads is vital to prevent galling, but others found the puller to work great right out of the box. The major drawback noted by users is the sharpness and shallow cutting threads on the shaft, with some concern for its long-term durability during heavy-duty use. Another reviewer received no instructions and was unsure of the function of the secondary collar. Despite these minor complaints, customers overall found the Marine Tech Tools Gimbal Bearing Puller to be an effective and efficient tool for removing gimbal bearings.

Kundeanmeldelser og vurderinger

1 kunders vurderinger
  • 5 stjerne
    100%
  • 4 stjerne
    0%
  • 3 stjerne
    0%
  • 2 stjerne
    0%
  • 1 stjerne
    0%

Vurder dette produktet

Del tankene dine med andre kunder

Fordeler

  • More effective and easier to use than older style pullers
  • Half the price of name-brand alternatives
  • Quick removal of bearings
  • Second collar for unknown application

Ulemper

  • Sharpe cutting threads on the shaft

Plattformtillit og kjøpstrygghet

trustpilot logo
4.2/5 9250 + reviews
Les anmeldelser
MA
Mohammad
Verifisert kjøper

“Excellent quality and original too,when ubuy send original things I will appreciate that ,I very satisfied thank you”

23 July 2026 · via Trustpilot
CK
Chitra
Verifisert kjøper

“The order and delivery progress was communicated very well. Package arrived within the estimated time. Products arrived as expected in good condition.”

22-Jul-26 · via Trustpilot
K
kund
Verifisert kjøper

“Good supply of products. Safe payment methods, and shipment worldwide! Genuine products.”

23-Jul-26 · via Trustpilot
OO
Onesi
Verifisert kjøper

“Was my first time buying a product from Ubuy, but I found it so helpful. This is reliable. Gonna place a new order!”

22 July 2026 · via Trustpilot
SJ
SAO JOHN
Verifisert kjøper

“Ubuy is a great online platform to buy stuff. Reliable, fast delivery time and great value for money. I've been using Ubuy online shopping platform for three years now and will continue to do so.”

23 July 2026 · via Trustpilot
Sikker utsjekk Global levering Enkel retur Originale produkter

Produktets prishistorikk

Viktig informasjon

  • Begrensninger: For produkter som fraktes internasjonalt, vennligst merk at eventuell produsentgaranti kanskje ikke er gjeldende; produsentens tjenestealternativer er kanskje ikke tilgjengelige; produktveiledninger, instrukser og sikkerhetsadvarsler er kanskje ikke tilgjengelig på destinasjonslandets språk; produktene (og medfølgende materiell) er kanskje ikke laget i samsvar med destinasjonslandets standarder, spesifikasjoner og krav om merking; og det kan være at produktene ikke har samme spenningsgrad og elektriske standard som destinasjonslandet eller ikke følger (det må brukes adapter eller strømomformer der dette gjelder). Mottakeren er ansvarlig for å forsikre seg om at produktet lovlig kan importeres til destinasjonslandet. Ved bestilling fra Ubuy eller deres partnere er mottakeren den registrerte importøren, og må etterleve alle lover og reguleringer i destinasjonslandet.
  • Ikke alle produktene som er opplistet hos Ubuy er til salgs, siden Ubuy er en global søkemotor. Produkter er underlagt reguleringer for eksport og handel.

NOK 2603

Bestill nå, så får du den omkring Onsdag, August 26

Antall:

Sikker transaksjonSikker transaksjon

PCI DSS-kompatibel og ISO 27001:2022-sertifisert, med krypterte betalinger og full kjøperbeskyttelse på hver bestilling.

Våre beste leveringspartnere
  • fedex
  • dhl
Rask levering over landegrensene

Funksjoner og fordeler

  • Marine Tech Tools Gimbal Bearing Puller works well on Mercruiser Alpha, Alpha 1, MR, Bravo, OMC, Cobra and Volvo.
  • Innovative design for removing gimbal bearings from outboard motors.
  • Easiest way to remove the bell housing gimbal bearing.
  • Simple DIY tool for removing gimbal bearings.
  • Built with a mission to support boat owners and mechanics through innovative tools.
  • Can't slip off as it locks into the gimbal bearing.

Ubuy-garanti

Opplev bekymringsfri shopping med 100 % originale produkter, PCI DSS-kompatibel betalingssikkerhet, ISO 27001-sertifisert databeskyttelse, den raskeste grensekryssende leveringen, gratis retur, og sikker emballasje på hver bestilling.*